+38 (063) 71-69-433  +38 (099) 98-21-762
Ежедневно 09:00 - 18:00
Выходной день воскресенье

How to restore metal parts?

At home, we often have to solve various problems of repair and troubleshooting: either replace the outlet, then change the light bulb or fix metal parts. Many of us had a question during the repair, how to glue metal to metal without welding and riveting?

Various troubleshooting methods

If we delve into history, we will see that in the 19th century, metal structures were joined together by riveting. And already later in the 20th century, welding was used. Currently, there are more advanced and alternative methods of joining metal parts - special adhesives that allow you to firmly connect and hold metal parts together. Compared to welding, this method is no worse than welding, and much more affordable and cheaper. And after gluing, the metal parts are firmly connected to each other, and are not damaged by external influences and movement. There is such a glue - Axfixer from Kolorstar, it is able to glue almost any material, not only glues metal to metal, but also joins plastic to metal, rubber, PVC, glass, ceramics, wood.

Advantages of Axfixer adhesive

Effective and versatile Axfixer adhesive for metal and other materials, made on a synthetic base, will restore your damaged products in normal household conditions, in industry and construction. With this tool, you can remove fistulas, seal cracks of any kind, and holes. Thanks to the enhanced formula, you can reliably glue products from the same material or different materials. Products that are completely different in composition and material, now it is not difficult to combine - rubber with leather, wood with metal, ceramics with glass, fabric with leather and much more.

Metal welding is a laborious and costly production, and gluing will save you much more money and time, and is in no way inferior to welding. Metal bonding is a modern and reliable way to restore metal parts and structures. And in order not to get an incomprehensible adhesive mass during the repair process, choose only high-quality glue for gluing metal. A high-quality glue should have the following properties:

  • Reliability - it must firmly connect parts and structures;
  • Resistance to temperature changes, it must withstand the lowest and highest temperatures;
  • Moisture resistance and water resistance, this is especially important if parts or structures are in the open air;
  • Durability - then the glued parts will serve you for a long time;
  • Minimal shrinkage and swelling after solidification;
  • Have a high viscosity, as this is an indicator of the versatility of the glue (it will be able to glue different materials together). Joints and seams after gluing will be even, the glue will not spread;
  • Protection against destruction and rust;
  • Resistant to environmental influences.

How to prepare for the repair of metal products

First of all, think about where your refurbished product will be located. If it is in the house, then the glue must be selected as non-toxic as possible so that you and your family do not suffer. Read carefully the instructions for use of the adhesive and its precautions.

The surface of the product to be glued must be clean and dry and free from rust. Wipe it dry and degrease it with an alcohol solution. Connect the parts firmly and hold after applying the glue for a firm connection. Avoid getting wet until the parts are stuck. Wear a respirator or mask to avoid inhaling glue fumes. If you follow the necessary safety rules and manufacturer's recommendations, you can easily restore your metal parts and products.